Hik DS-3E1326P-SI 24-Port Fast Smart PoE Switch

Network Parameters

• Port Number24 × 100 Mbps PoE RJ45 port, and 2 × gigabit combo
• Port TypeRJ45 port, full duplex, MDI/MDI-X adaptive
• StandardIEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z
• High Priority PortsPorts 1 to 8
• Forwarding ModeStore-and-forward switching
• Working Mode

  Standard mode (default)

  Extend mode

• MAC Address Table16 K
• Switching Capacity8.8 Gbps
• Packet Forwarding Rate6.5472 Mpps
• Internal Cache4 Mbits

PoE Power Supply

• PoE StandardIEEE 802.3af, IEEE 802.3at
• PoE Power Pin

  End-span: 1/2(-), 3/6(+)

  Mid-span: 4/5(+), 7/8(-)

  8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

• PoE PortPorts 1 to 24
• Max. Port Power30 W
• PoE Power Budget370 W

Software Function

• Device MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
• Port ConfigurationPort rate configuration, slow control, and ports enabling
• Long RangeUp to 300 m transmission
• PoE Configuration

  PoE watchdog: Ports 1 to 24 auto detect and restart the cameras that do not respond.

  PoE enabling: Support

• Port Rate-LimitingRate-limiting for ingress and egress ports
• Storm ControlStorm control of unknown unicast, multicast and broadcast
• Port MirroringSupport
• Link AggregationStatic link aggregation supported for G1 and G2 port
• Port IsolationPorts in isolation group cannot communicate with each other.
• QoSWRR and SP scheduling and port priority
• VLAN4094 VLANs
• STPSTP and RSTP protocols
• SNMPSNMPv1 and SNMPv2c supported for obtaining node information of the system and interfaces
• LLDPLLDP protocol supported for port configuration, global configuration and neighbor discovery

General

• ShellMetal material
• Net Weight2.83 kg (6.24 lb)
• Gross Weight3.33 kg (7.34 lb)
• Dimension (W × H × D)440 mm × 44 mm × 221 mm (17.32” × 1.73” × 8.70”)
• Operating Temperature-10°C to 55°C (14°F to 131°F)
• Storage Temperature-40°C to 85°C (-40°F to 185°F)
• Operating Humidity5% to 95% (no condensation)
• Relative Humidity5% to 95% (no condensation)
• Power Supply100 VAC~240 VAC, 50/60 Hz, Max. 6.5 A
• Max. Power Consumption400 W
• Power Consumption In Idle5 W

Approval

• EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (AS/NZS CISPR 32: 2015)
• SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
• ChemistryCE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)