4G Dialler Gen3
The Ness 4G Dialler provides a 4G pathway for alarm diallers to communicate in the absence of a landline.
This unit provides support for any dialler that reports to any Central Monitoring Station (without a need to any special control room receiver) or can dial an alarm event to a personal number, in the same fashion as it would if a landline was available.
Built in backup battery allows operation in the event of brief mains interruptions.
No programming of the device is required, just plug and go.
Supplied with plug pack power supply, telephone lead, 4G Antenna.
This model is supplied with a Ness SIM card (not locked), see Activate SIM
IMPORTANT NOTES
• This product is designed to provide a cellular pathway for alarm control panels with landline diallers in the absence of landlines.
• Not intended for industrial use.
• Not recommended for use in lift cars or other non-stationary situations.
• Ensure that the location has adequate cellular signal and test operation after installation.
• The unit must be tested weekly to verify cellular reception and correct operation.
• The 12V plug pack supplied must be used. Do not connect to an unregulated or 'noisy' power supply.
• If you are upgrading from a 3G model, please replace the old antenna with the 4G antenna supplied.
