4G Dialler with Embedded Telstra SIM
The Ness 4G Dialler provides a 4G pathway for alarm diallers to communicate in the absence of a landline.*
No programming of the device is required, just plug and go.
Supplied with plug pack, telephone lead, 4G antenna and Telstra SIM.
Built in backup battery allows operation in the event of brief mains interruptions.
NESS TELSTRA SIM CARD INCLUDED see Activate SIM
Activate the SIM on a competitive NESS SIM PLAN
• Easy online activation & simple billing
• Low cost Retail & Trade monthly SIM plans
This unit is supplied with a Ness Telstra SIM pre-fitted and locked to the dialler. Do not remove the SIM.
*CONTACT ID ADVISORY
Due to signal distortion and timing inconsistencies caused by analog-to-digital conversion over VoLTE, the reliable transmission of CONTACT ID reporting format over 4G networks cannot be guaranteed and is therefore not recommended.
IMPORTANT NOTES
• This product is designed to provide a cellular pathway for alarm control panels with landline diallers in the absence of landlines.• Not intended for industrial use.• Not recommended for use in lift cars or other non-stationary situations.• Ensure that the location has adequate cellular signal and test operation after installation.• The unit must be tested weekly to verify cellular reception and correct operation.• The 12V plug pack supplied must be used. Do not connect to an unregulated or 'noisy' power supply.• If you are upgrading from a 3G model, please replace the old antenna with the 4G antenna supplied.
