PERMACONN PM35, (IP)

Reports on IP to the Central Station

SKU: 106-397

Overview
Features
Specifications
Downloads

IP communicator

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM35 is a versatile alarm communicator that reports on IP to the Central Station.

This unit can interface with a range of alarm panels using Contact ID. Alarm messages are sent using the clients ISP and are received by any Central Station that has the Permaconn solution installed.

Key Features

Remote alarm panel Upload/Download available using IP
Plug & Play solution,
Interfaces with any Contact ID alarm panel,
1 input + 1 output, function control using Atlas and/or Pocket Secure,
A low-cost hardware solution for NBN or Naked DSL services,

Additional Features

Small size - Fits inside alarm panel enclosure
AES128 encryption for alarm data - Secure transmissions over the public internet,
High-speed RS232 Interface - Future development,
Internal watchdog reset function - No unnecessary service call-outs,
PM35 acquires an IP address automatically using the customers DHCP service. No, IT headache,
Various diagnostic LEDs - Easy installation,
Activate, commission and diagnose using Atlas - Seamless installation process,
Monitors & reports dialler interface lead status - Panel dialler to Permaconn interface,
Operates on 8 – 15V DC with low current draw – Easily powered directly from alarm panel,
Outputs can be configured to arm/disarm the alarm system, control gates and lights. ‘Pocket Secure’ smartphone app controls these functions.

Housing Material	ABS Plastic - white
Dimensions	110mm (h) x 25mm (d) x 80mm (w)
Weight	0.09Kg
Operating Environment	0°- 50°C @15% to 85% humidity (non-condensing)
Power	8 - 15V DC Terminal (must be powered from approved supply)
Power Consumption	0.15A @13.8V DC
Communication Protocol	Ethernet (10/100BASE-T)
IP Address Allocation	DHCP or Static IP
Serial Port	High Speed RS232 interface
Auxiliary Input	1 x 24Hr input - state change detected every second. EOL 3.3K
Auxiliary Output	1 x Open Collector output @ 50mA (max) Function control using Atlas web portal and/or Pocket Secure
Static IP Network Configuration	Ethernet interface using 'IpSetup' program Atlas web portal using GPRS/3G connection
Data Security	AES Encryption
Supported Modulation	BELL-103, ITU-V21/V22/V22B
Approvals	EN301489, EN301908, EN62311, EN60950-1

IP communicator

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM35 is a versatile alarm communicator that reports on IP to the Central Station.

This unit can interface with a range of alarm panels using Contact ID. Alarm messages are sent using the clients ISP and are received by any Central Station that has the Permaconn solution installed.