Normal wall switches offer on and off control. Normal dimmer switches offer a single, manual light setting. WallSwipe creates a Z-Wave switch by fusing together the power of the connected Nano’s Z-Wave Plus, a presence sensor, and touch-sensitive glass normally used in smartphones.
(Requires Z-Wave module (e.g. InWall Dimmer, sold separately)
SLIDE
Sliding your finger up and down WallSwipe's touch-sensitive glass allows you to change the settings of whatever it's connected to. Swipe up and lights can brighten or Curtains open. Slide down and the reverse will happen.
SWIPE
Control your switches without even touching them; simply wave your hand in front of WallSwipe to turn connected devices on or off. Utilising a 6cm IR scanner, WallSwipe can operate in light or the dark allowing you to use your switch without even seeing it.
TOUCH
WallSwipe’s advanced features don’t all have to be used. For simpler control, WallSwipe can be be used as a simple on and off switch. Tap your lights and electronics on, and then tap them off again.
TAP
Go straight to the setting you need. WallSwipe's glass surface has 11 different control touch-sensitive zones. Tap on any of them and any compatible device connected to WallSwipe will change direct to that setting. Lights dimmed to 50%, tap halfway. Windows blinds fully open? Tap at the top.
Any switch. Anywhere.
Just like Aeotec’s Nano range WallSwipe is designed to be easy to install.
Connecting WallSwipe to a Nano takes seconds; simply plug WallSwipe into a Nano via the connection port. Attaching it to your wall is just as easy. Compatible with 86mm / 3.4″ gang boxes, WallSwipe can be used with both single and multi-switch panels and has been designed to work as a wall switch globally.
The Nanos that WallSwipe works with
Nano Dimmer.
Make your lights smart lights.
Nano Shutter.
Connected motor control.
Nano Switch.
Convert switches & sockets to Z-Wave.
