PERMACONN PM1048PACK1

Reports on 3G, GPRS and IP to the Central Station

SKU: 106-398

3G, GPRS and IP communicator

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM1048 is a versatile alarm communicator that reports on 3G, GPRS and IP to the Central Station.

This unit can interface with a range of alarm panels using RS232 or Contact ID.

Primary alarm path is 3G or IP if Ethernet cable fitted, with PSTN backup when DI400 module installed.

Secure VPN within Optus & Telstra networks - Dedicated for Permaconn events only
AES128 encryption for alarm data - Secure transmissions over the public internet
Various diagnostic LEDs - Easy installation
Activate, commission and diagnose using Atlas - Seamless installation process
Two dedicated wireless paths of communication as standard - Uptime in excess of 99.9%
Ability to connect phone line on DI400 - Four (4) paths of communication
Onboard battery charger circuit - The backup battery can be fitted for standalone operation
Internal watchdog reset function - No unnecessary service call-outs
Monitors & reports dialler interface lead status - Panel dialler to Permaconn interface secure
Monitors and reports DC power & battery status - Reliable standalone operation
* AS/NZ2201.5:2008 compliance

Housing Material/Dimensions	Metal powder coated - White 170mm (w) x 205mm (h) x 48mm (d)
PCB Dimensions	138mm (w) x 100mm (h)
Weight	1.00Kg
Operating Environment	0°- 50°C @15% to 85% humidity (non-condensing)
Antenna	Triple band 3G & Dual band 2G
3G Modem	Telit HE910
Communication Protocol	Ethernet (10/100BASE-T)
Power	14.5V DC Plug Pack - Supplied (Plug pack must have approval if using other)
Power Consumption	Standby: 0.05A Transmitting: 0.60A
Power Reporting	Powered from 14.5V DC plug pack: DC - Fail: >11.8V DC DC - Restore: <12.8V DC
Battery Status:	Battery Fail: >11.6V DC (10 minute delay) Battery Restore: <12.5V DC (sent immediately)
Backup Battery	12V 1.2A/Hr sealed lead acid battery
Typical Backup Time	16 hrs
Auxiliary Input	Three (3) 24 hour inputs, state change detected every second. EOL 3.3K
Tamper Input	24Hr input. No EOL
Auxiliary Output	Three (3) Open collector outputs @50mA (max). Function control using Atlas web portal and/or Pocket Secure
Static IP Network Configuration	Ethernet interface using 'IpSetup' program Atlas web portal download using cellular 3G connection
Data Security	AES Encryption
Data Modem	14.4K baud rate modem for upload/download
Supported Modulation	Bell-103, ITU-V21/V22/V22B
Serial Interface	Consult PM1048 manual for compatible panels
Communications Class	As per compliance statement
Approvals	EN301489, EN301908, EN62311, EN60950-1, EN55022, EN55024, AS/NZ S60950.1, AS/CA S042.1, AS/CA S042.4

3G, GPRS and IP communicator

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM1048 is a versatile alarm communicator that reports on 3G, GPRS and IP to the Central Station.

This unit can interface with a range of alarm panels using RS232 or Contact ID.

Primary alarm path is 3G or IP if Ethernet cable fitted, with PSTN backup when DI400 module installed.