PERMACONN PM45-4G (4G, GPRS and IP)

Reports on 4G, GPRS and IP to the Central Station

SKU: 106-396B

Overview
Features
Specifications
Downloads

4G, GPRS and IP communicator

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM45-4G is a versatile alarm communicator that reports on 4G, GPRS and IP to the Central Station.

This unit can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/GPRS in the event of a wired ethernet failure. If no IP connection exists the communicators will report on GPRS or 4G/3G only.

Key Features

Remote alarm panel Upload/Download available using GPRS/3G/IP
Dual SIM + IP alarm communicator,
Plug & Play solution,
Interfaces with any Contact ID alarm panel,
1 input + 1 output, function control using Atlas and/or Pocket Secure,
A low-cost hardware solution for NBN or Naked DSL services,
PM45-4G communicates on 4G & GPRS networks

Additional Features

Small size - Fits inside alarm panel enclosure and suitable for ATM & M2M applications
Secure VPN within Optus & Telstra networks - Dedicated for Permaconn events only
AES128 encryption for alarm data - Secure transmissions over the public internet
High-speed RS232 Interface - Future development
PM45-3G acquires an IP address automatically using the customers DHCP service. No IT headache
Various diagnostic LEDs - Easy installation
Activate, commission and diagnose using Atlas - Seamless installation process
Three (3) dedicated paths of communication - Uptime in excess of 99.9%
Internal watchdog reset function - No unnecessary service call-outs
Monitors & reports dialler interface lead status - Panel dialler to Permaconn interface secure
AS/NZ2201.5:2008 compliance
Outputs can be configured to arm/disarm the alarm system, control gates and lights. ‘Pocket Secure’ smartphone app controls these functions.

Housing Material	ABS Plastic - white
Dimensions	110mm (h) x 25mm (d) x 80mm (w)
Weight	0.12Kg
Operating Environment	0°- 50°C @15% to 85% humidity (non-condensing)
Antenna	Triple band 3G & Triple band 3G
Modem	Quectel EC21
Power	8 - 15V DC Terminal (must be powered from approved supply)
Power Consumption	Standby: 0.08A @13.8V DC Transmitting: 0.19A @13.8V DC
Communication Protocol	Ethernet (10/100BASE-T)
IP Address Allocation	DHCP or Static IP
Serial Port	High Speed RS232 interface
Auxiliary Input	3 x 24Hr input - state change detected every second. EOL 3.3K
Auxiliary Output	3 x Open Collector output @ 50mA (max) Function control using Atlas web portal and/or Pocket Secure
Static IP Network Configuration	Ethernet interface using 'IpSetup' program Atlas web portal using GPRS/3G connection
Data Security	AES Encryption
Supported Modulation	BELL-103, ITU-V21/V22/V22B
Approvals	EN 55022:2006/A1:2007, AS/CA S042.1-2011, AS/CA S042.4-2011 AS/NZS 60950.1-2011, AES2201.5:2008, EN 62311:2008, EN 301489-1 EN 301 489-24, EN 301 908-1, EN60950-1

4G, GPRS and IP communicator

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM45-4G is a versatile alarm communicator that reports on 4G, GPRS and IP to the Central Station.